REC Seed Grader SG-6T

REC Seed Grader SG-6T Specification

Type
seed grader

Material
MS

Capacity
6 T/hr

Computerized
No

Automatic Grade
Automatic

Voltage
440 Volt (v)

Power
9.5 Horsepower (HP)

Warranty
1

REC Seed Grader SG-6T Trade Information

Minimum Order Quantity
1 Metric Ton

Payment Terms
Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque, Western Union

Delivery Time
35 Days

Sample Policy
Contact us for information regarding our sample policy

Main Export Market(s)
Asia, Middle East, Africa

About REC Seed Grader SG-6T

Specification

Capacity (based on wheat) : 6 Tons Per Hr. at 12% Moisture Content & 10% impurities
No. of Screens / Layers : Three, Flat, Oscillating (8 Sections)
Size of each screen (WxL)
Top Screen : 1450 x 1600 mm
(In 2 Sections of 1450x800 mm each)
Middle Screen : 1450 x 2400 mm
(In 3 Sections of 1450x800 mm each)
Bottom Screen : 1450 x 2400 mm
(In 3 Sections of 1450x800 mm each)
Total Screen Area : 9.28 Sq. Mtr.
Total length of Seed travel
on Screens : 6.4 Mtrs
Screen Inclination : Fixed
Screen Perforation
Cleaning Device : Rubber Ball System
No. of Reject Augers : Two
No. of Air Aspiration : Two (Pre & Post)
Fan Capacity > 7500 CFM at 75mm WGSP
Fan Speed : 1400 RPM
Electric Motor : 7.5 HP for Blower 2.0 HP for Sieve Boat, Feed Roller & Auger Shaft
Screen Oscillations : Variable / Fixed
Overall Size (LxBXH) : 305x225x280 cm (Approx.) with Blower Assembly

Application

fine cleaning of all cereal seeds, oil seeds, foresty seeds, fodder seeds, pulses etc. e.g. wheat, paddy, maize, bajra, urd, moong, gram, soyabean, sunflower, mustard, jowar, barley, coffee seeds etc by removing lighter impurities like chaff, husk, dust & dirt/sand and also oversize & undersize impurities from the raw seed/grain.

Salient Features

Dynamically balanced Aspirator Fan (Blower). .
Variable air aspiration with step less Air Control.
Air Chamber, Screen deck assembly & Spouts are self emptying type.
High Carbon Steel Strip / UHMW Hangers & balanced eccentrics with connecting rod for screen deck oscillation.
Interchangeable, burrs & curvatures free, easily changeable Screens/Sieves.
Provision of Bag holders at bagging off height & belt guard.
All steel, welded, compact and rigid construction with Structural Framework.

Raw Seed/Grain is fed into the feed hopper and are evenly distributed by a fluted feed roller through a controlled feed gate on the top Screen. Before falling over the top screen, seeds/grains are subjected to the primary air aspiration that separates lighter impurities like chaff, straw, dust etc. Seeds/Grains are then passed through three screen separations according to width & thickness. After passing through screen separations, cleaned grains / seeds pass through secondary air aspiration where remaining lighter impurities are separated. Final seed/grain and impurities are collected separately through discharge spouts into the bags holded on the bag holders.

Standard Accessories: 2 meter long Air trunk, | No.-Air bend, one Set of 3 Screens for one particular Crop Seed & Tool kit.

Optional Accessories Available: Cyclone Dust Collector,Air Trunk, Surge Bin, Feeding Elevator.

We also plan, design, manufacture, supply and erect seed processing, grain / spice / pulses cleaning and handling plants on turn-key basis. Due to constant process of research & development, all designs and specifications are subject to change without prior notice. Capacities mentioned are based on wheat.